CNC Machining service of material of aluminum

http://www.china-jinghai.comn 7.6铝001 ALU004

The typical application of aluminum alloy, Under the condition of the continuous development of industry, more and more is also high to the requirement of material, the suitable material not only on the performance is superior, and the cost is also a lot of improvement. Here are our detailed to introduce the use of various materials.

The characteristics of the various series of aluminum, bringing you:

1050food, chemical, and brewing industry with extrusion coil, a variety of hoses, powder.
1060requirements and formability are high, but the strength requirement is not high, the chemical equipment is its typical application
1100is used for processing needs good formability and high corrosion resistance but does not require a high intensity of component parts, such as chemical products, food industry equipment and storage containers, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, printing plate, nameplate, reflective apparatus
1145packing and insulation aluminum foil, heat exchanger
1199electrolytic capacitor foil, optical reflective deposited film
1350wire, conductive wire, bus, transformer strip

 

2011 screw and requirements with good cutting performance of mechanical processing products
2014 is applied to the high strength and hardness (including high temperature).Aircraft heavy thick plate, forgings, and extrusion materials, wheels and structural components, multi-stage rocket fuel tanks and aircraft parts, the first level truck frame and suspension parts
2017 was the first to obtain industrial application of alloy. The current application scope is narrow, mainly for the rivet, general machinery

parts, structure and transportation structure of propeller and fittings
2024 aircraft structure, rivets, missile components, truck wheel, screw elements, and other various structures
2036 automobile body sheet metal parts
2048 weapons aviation spacecraft structure and structural parts
2124 aviation spacecraft structure
2218 aircraft engine and diesel engine piston aircraft engine cylinder head, jet engines and compressor impeller ring
2219 space rocket oxidant groove welding, supersonic aircraft envelope and structural parts, working temperature is – 270 ~ 300 ℃.Good weldability and high fracture toughness, T8 state has a high ability to resist stress corrosion cracking
2319 welding pull 2219 alloy electrode, and filling solder
2618 die forgings and free forging.The piston and aviation engine parts
The structure of the 2 a01 working temperature is less than or equal to 100 ℃ rivet
2 how a02 working temperature of 200 ~ 300 ℃ turbojet axial compressor blade
2 a06 working temperature of 150 ~ 250 ℃ of aircraft structure and the working temperature of 125 ~ 250 ℃ rivet of the aircraft structure
2 a10 strength is higher than 2 a01 alloy, used in the manufacture of working temperature is less than or equal to 100 ℃ rivet of the aircraft structure
2 a11 aircraft structure of moderate intensity, propeller blades, means of transport and architectural structures.Aircraft medium strength bolts and rivets
2 a12 aircraft skin, bulkhead, ribs, SPAR, rivets, etc., architecture and transport structure
2 a14 complex shape of free forging and die forging
2 a16 working temperature of 250 ~ 300 ℃ of aerospace aircraft parts, welding work at room temperature and high temperature container with airtight cabin
2 a17 working temperature of 225 ~ 250 ℃ of aircraft parts
2 a50 shape complex medium strength of the parts
2 a60 aircraft engine compressor wheel, guide wheel, fan, impeller, etc
2 a70 aircraft skin, aircraft engine piston, guide wheel, wheel, etc
2 a80 aeroengine compressor blade, impeller, piston, flange and other high temperature parts
2 a90 aviation piston engine

3003 is used for processing need good formability, high corrosion resistance, weldability good parts, components, or both require these performance and needs to have more than 1 XXX alloy high strength work, such as kitchen utensils and appliances, food and chemical products processing and storage devices, and transportation of liquid product tank, tank, with thin plate processing all kinds of pressure vessel and pipeline

3004 all aluminum cans cans, requires higher than 3003 alloy intensity of parts, chemical products production and storage device, sheet processing parts, construction mechanical parts, construction tools, lamps and lanterns of various parts
Room 3105 partition, dampers, trailer plate, gutters and downspouts, sheet forming machined part, bottle caps, bottle stoppers, etc
3 a21 airplane oil tank, oil pipe, rivet wire, etc.;Building materials and food and other industrial equipment

5005 and 3003 alloy are similar, with moderate intensity and good corrosion resistance.Used as a conductor, cooking utensils, dashboard, shell and architectural decoration.Anodic oxidation film than those of the 3003 alloy oxide film is more bright, and tonal and consistent with that of the 6063 alloy
5050 sheet can be used for lining board refrigerating machines and refrigerators, cars trachea, tubing and agricultural irrigation pipe;Can also be processed plate, pipe, bar, special-shaped material, wire, etc
5052 the alloy has good forming performance, corrosion resistance, can candle, fatigue strength, medium static strength, used to make airplane oil tank, oil pipe, as well as the transportation vehicles, ships, sheet metal parts, instrument, lamps stent and rivet, metal products, etc
5056 mg alloy and cable sheath rivet, zippers, nails, etc.;Clad aluminum wire is widely used in processing agricultural insect traps, and other places need to have high corrosion resistance
5083 it is applied to high corrosion resistance, good weldability and medium strength, such as ships, cars and aircraft plate weldments;Strict fire prevention of the pressure vessel, the cooling device, television tower, drilling equipment, transportation equipment, missile component and armor
5086 it is applied to high corrosion resistance, good weldability and medium strength, such as ship, automobile, airplane, low-temperature equipment, television tower, drilling equipment, transportation equipment, missile component and the deck and so on
5154 welded structure, storage tank, pressure containers, ships and offshore facility structure, transport pan cans
5182 can cover sheet is used for processing, automobile panels, wheel, reinforcement, bracket and other components
5252 used in the manufacture of a higher intensity of decoration, such as car decorative parts.After the anodic oxidation with light transparent oxide film
5254 hydrogen peroxide and other chemical product containers
Welding of magnesium content greater than 3% of the 5356 aluminum – magnesium alloy welding rod and welding wire
5454 welded structure, pressure vessels, Marine facilities
5456 armor plate, high strength welded structure, storage tank, pressure vessel, material of the ship
5457 after polishing and anodic oxidation treatment of the automobile and

 

other equipment
5652 hydrogen peroxide and other chemical products storage containers
5657 by polishing and anodic oxidation treatment of the automobile and other equipment, but in any case must ensure that the material has fine grain size
5 how a02 aircraft fuel tank and pipes, wire, rivet, the structure of the ship
5 a03 medium strength welded structure, cold stamping parts, welding containers, wire, can be used to replace 5 how a02 alloy
5 a05 welding structure, the aircraft skin skeleton
5 a06 welded structure, the cold die forging parts, welding containers bearing parts, aircraft skin parts
5 a12 welded structure, bulletproof deck

A strong tall 6005 extrusion profiles and pipes, used for 6063 alloy parts, such as a ladder, TV antenna, etc
6009 car plate
6010 sheet: car body
6061 request has the certain strength, weldability and high resistance to corrosion of all kinds of industrial structural, such as manufacturing truck, tower building, vessel, trolley, furniture, machinery parts, such as precision machining with tube, rod, shaped material, plates
6063 building material, irrigation pipes and vehicle and bench for extrusion materials, furniture, fencing, etc
6066 forgings and welding structure extrusion materials
6070 heavy welding structure and automobile industry with materials and pipe extrusion
6101 buses with high-strength bars, electric conductor and cooling equipment etc
6151 for forging crankshaft rolling ring parts, machine parts and production, for both require a good forging performance, high strength, and good corrosion resistance
6201 guide material with high strength wire
6205 thick plate, pedals, and high resistance to impact extrusion
Corrosion resistance of 6262 alloy is better than that of 2011 and 2017 have thread high stress components
6351 vehicles of extrusion parts, such as water, oil pipelines
6463 buildings with various instruments profiles, and the anode oxidation treatment after the bright decoration on the surface of the car

  • Ningbo Jinghai is  a production base of OEM/ODM cnc turning parts / milling parts since 2012, and we have been working with many company in Europe.
    We are in a good position not only to supply high quality of automotive parts, machinery parts, metal processing parts, but also perfect quality control system and  the excellent after sales service.
    GB/T 19001-2016 & ISO 9001:2015 Quality Certified Factory & PPAP process  is available.    
    If any interest pls mail me: helen@china-jinghai.com 

 

 


Post time: Nov-05-2019